Category
Contact
Tel: ( 86) 755-26996606
Fax: ( 86) 755-26007653
E-mail: rosemary@ussharp.com
Woods-tiger@ussharp.com
Web site: www.ussharp.com
Address: Floor 4, Jinhui Building, Nanhai Road, Nanshan District, ShenZhen
Product
-
Basic information
Name: M2Al Square End Mills for Aluminum 2F
Model: HMALFC2
Remark:
2 Flutes, 45°Helix Angle, Center Cutting.
Ground, hardness is up to HRC66~68. Cutting temperature is suggested to be under 650°C.
Good performance in slotting, side milling and surface milling; For semi-finishing and finishing process.
Best suited for applications in medical, die, mould, automotive and general engineering fields.
For cutting of Aluminum and Aluminum Alloy, etc.
Product details
-
The Mills are made by grinding process. Cutting edge has a sharp rake angles and flutes have higher value helix angles, which are designed specially for aluminum and aluminum alloy. This can have a good cutting performance and high surface finishes. Mills material is a kind of high-performance High Speed Steel(W6Mo5Cr4V2Al), it has much higher wear resistance than other HSS in machining when the temperature is up to 600~650°C, this improved tool life dramatically and allows a higher machining speed.
The common sizes of Mills are listed in below chart.
Customized sizes of products are available, please feel free to provide your requirements.
Cutting Diameter (mm)
Shank Diameter (mm)
Length of Cut (mm)
Overall Length (mm)
Ф1.0
6
3
50
Ф1.5
6
4.5
50
Ф2.0
6
6
50
Ф2.5
6
7
50
Ф3.0
6
10
50
Ф3.5
6
10
50
Ф4.0
6
12
50
Ф4.5
6
12
50
Ф5.0
6
15
55
Ф5.5
6
15
55
Ф6.0
6
16
55
Ф6.5
8
16
65
Ф7.0
8
20
65
Ф8.0
8
20
65
Ф10.0
10
25
75
Ф12.0
12
30
85
Ф14.0
12
35
85
Ф15.0
16
40
95
Ф16.0
16
40
95
Ф18.0
16
45
95
Ф20.0
20
50
100